Select your Products >

GP-1007 L.V. POWER SUPPLY AC/DC Suitable to provide 2 to 12 volts in step of 2 volts. Four 4mm socket terminals for AC and DC output sepaerately with fuse and indicator in ventilated painted steel cabinet. Select Item Description Type Load .01 4 Amp. .02 5 Amp.  GP-1011.1 H.T. POWER SUPPLY UNIT Provides output H.T. 0-500 volts at 100 mA, L.T 2.5 volts, 4.2 volts, 6.3 volts and 12.6 volts at 4 Amps. Bias supply -50-0-50 volts, floating with one meter for H.T. Volts ac and dc with overload and short circuit protection. The unit is housed in nicely painted metal case with carrying handle. Complete with mains switch, fuse, indicator lamp and main cable etc. Power require 220 Volts a.c. 50 Hz.  GP-1012.1 MIKEN 5KV EHT SUPPLY Output 100 to 5 Kv at 3mA continuous. Fully floating EHT circuits suitable for operation of spark, counters, discharge tubes etc. Provided variable output upto 5 KV. The EHT circuits are fully floating so that certain experiments the positive or negative terminals may be safely connected to earth. The EHT output are taken from 4mm sockets and displayed on a 0 to 5 KV meter. Also on the front panel are a mains switch and indicator lamp. The main fuse is mounted on the back panel. In a robust metal case with feet, mains cable fitted by moulded connector. Cable and connector removable for storage. Workable on 220 V 50 HZ.  GP-1012.2 MIKEN 6KV EHT SUPPLY Same as Cat. No. 1012.1 but 6Kv.  GP-1020.1 L.T. POWER SUPPLY UNIT (D.C. Power Supply) Provides output 0-15 volts d.c. at 1 Amp. ± 10% a.c line variation and noise less than 2 mV RMS with 2 meters with overload and short circuit protection. The unit is housed in nicely painted metal case with carrying han-dle. Complete with main switch, fuse, indicator lamp and main cable etc. Power require 220 volts 50 Hz. Select Item Description Type Range .01 0-15V 1A .02 0-15V 2A .03 0-30V 1A Page : 1 | 2 | 3 |